HomeNewsSebastian Jacobs /  Why dont you use straps?

QuickLay Fire Attack News & Articles

Hose, equipment and the fire response industry

Why dont you use straps?

Posted by Sebastian Jacobs
Sebastian Jacobs
Keen Australian based fire fighter
User is currently offline
on Thursday, 29 August 2013
in Water on the Fire

"Why don't you just use straps?"

Is a question we sometimes get!

The best way to appreciate the bigger picture is to consider the value of a firefighter's helmet. I personally have worn my helmet for 12 years and for the first time only 3 months ago did it actually do its job and protect my head from a falling garage door while operating in an underground car park fire- absolutely saving my life.

For 11 or so years prior to this nothing fell on my head but the one time it did the total cost of the few helmets I've had paid for themselves with my life.

So yes, you can just use a set of straps and generally they will hold the hose...

But what if?

  • You trip and drop the load and it looses its form?
  • You want to throw the whole load across a gap to a boat or building and the exposed hose gets snagged?
  • You want to only deploy half the hose, not the whole hose, causing the remaining half to loose its form?
  • You want to be able to open the the locker on the pumper and know the load will definitely be good-to-go?
  • You need to deploy hose in poor visibility?
  • You arrive at a big job with people you've not worked with before and want to be tasked based on the pack you have - not a long discussion?
  • You want to feed the neatly packed hose through a gap or under/over a fence?
  • You're working with a crew you don't know and they have a different way of strapping the hose?
  • You just want to become really efficient with a dedicated piece equipment that's been tried and tested and designed for one task...

In these very possible scenarios straps just don't cut it.

In my last article I discussed the The Cleveland Hose Load and specifically why it's great as well as its inherent shortcomings-

If you add the use of straps there's a whole lot more to consider with the Cleveland Hose Load, most importantly:

  • The thumb knot or Overhand Knot.

The Attack Pack deliberately isolates the two hose ends from the main body of the hose, this prevents the catastrophic failure caused when one hose end pops under one or more coils forming a simple but show-stopping thumb knot.

0 votes


No comments made yet. Be the first to submit a comment

Leave your comment

Guest Thursday, 22 February 2018
Copyright © 2018. Quicklay Fire Attack - Highrise Kits | Remote Access Packs | Fire Hose Bags. Designed by